DIVISIO 5000
The DIVISIO 5000/5100 is top of its class in flexible, high-speed depaneling systems. The machine is only 1000mm / 1200mm long and has a
working area of 330 x 350mm / 460 x 460mm. The modular frame construction leaves enough room for the installation of
for example a carrier circulating system or an underfloor conveyor with an integrated lift device. The machine consists of 2 lanes which can be configured according to the customer’s
demands. The PCB panel enters the machine on lane 1 where it is routed and the routed PCBs are subsequently transferred via a gripper to lane 2. The handling gripper axis is made of carbon fiber-reinforced plastic, ensuring high stiffness and accuracy.
Description
Additional Info
Description
The DIVISIO 5000/5100 is top of its class in flexible, high-speed depaneling systems. The machine is only 1000mm / 1200mm long and has a
working area of 330 x 350mm / 460 x 460mm. The modular frame construction leaves enough room for the installation of
for example a carrier circulating system or an underfloor conveyor with an integrated lift device. The machine consists of 2 lanes which can be configured according to the customer’s
demands. The PCB panel enters the machine on lane 1 where it is routed and the routed PCBs are subsequently transferred via a gripper to lane 2. The handling gripper axis is made of carbon fiber-reinforced plastic, ensuring high stiffness and accuracy.
Features
- Positioning system with CFK-axis
- Linear motors for the highest dynamics and accuracy
- Ionization unit
- Automatic tool change
- Complete tool management
- Breakage control
- Length verification
- Diameter check
- Life span monitoring
- Dynamic utilization of full router bit
- Automatic maintenance schedule
- Automatic gripper finger changeover
- Camera system
- Fiducial recognition
- Cut inspection
- Teach function
- Correction function
- Bad mark recognition
- Code read
- Dust extraction
- Manual suction unit
- Low-pressure control
- Automatic product changing
- ASYCAM CAD data conversion
- Customized transport modules
- Customized data interface
- Global remote control
- Switch cabinet on top, on the side or detached
Additional Info
The DIVISIO 5000/5100 is top of its class in flexible, high-speed depaneling systems. The machine is only 1000mm / 1200mm long and has a
working area of 330 x 350mm / 460 x 460mm. The modular frame construction leaves enough room for the installation of
for example a carrier circulating system or an underfloor conveyor with an integrated lift device. The machine consists of 2 lanes which can be configured according to the customer’s
demands. The PCB panel enters the machine on lane 1 where it is routed and the routed PCBs are subsequently transferred via a gripper to lane 2. The handling gripper axis is made of carbon fiber-reinforced plastic, ensuring high stiffness and accuracy.
